Tower Cranes

Ropes for
Civil Engineering

Tower Cranes

For a top-level performance, various applications of relevance to civil engineering such as drilling, trench-cutting, grabbing, or pile-driving require rope types tailored to the specific purpose. Especially in the field of civil engineering, TEUFELBERGER brings long-standing experience obtained by cooperating with leading equipment manufacturers and prestigious end customers.


  • Utmost safety
    TK ropes are non-rotating. Even with extreme lifting heights, there is virtually no rotation of the hook block. The high breaking forces are achieved thanks to the use of cutting-edge software solutions in rope design, parallel lay of the inner rope, and SUPERFILL® compaction.
  • Long service life
    The computer-optimized rope geometry and the ideal distribution of the load between the inner and the outer rope layers ensure the outstanding durability of our ropes. Grease inside the rope provides for optimum lubrication. Many of these ropes come with a PLASTFILL™ insert.
  • Good value for money
    Their high minimum breaking force allows crane designers to use thinner ropes and smaller rope sheaves and drums.
  • Excellent winding performance
    on rope drums thanks to the ropes‘ high form stability against lateral pressure.
  • Handling
    Our ropes are flexible. This makes them easy to handle.

Product Range

* Langs lay ropes may be used with multi-layer winding (on the drum) only, or they must be subjected to periodical, non-destructive checks.